The heating time depends on the size of the branding iron and the material you are using. Generally, it takes 5 to 25 minutes to heat up.
When working with leather, it is very important that the stamp does not get too hot. Tip: always test the branding iron on a scrap piece of material similar to the one you want to stamp on.
Large branding irons: The larger the branding iron, the longer it takes to heat. Therefore, when you receive it, try testing it on a scrap piece that matches the material you want to stamp on.
Recommended temperatures:
Wood: 300 – 400°C
Leather: approximately 150°C
JH Machining branding irons are suitable for the following leather:
JH Machining branding irons are suitable for the following types of wood:
Applewood
Beech wood
Douglas wood
Oak wood
Maple
Ash wood
Pine wood
Elm Dutch
Cherry wood
Larch wood
Mahogany
Walnut wood
Padouk
Purpleheart
Yew wood
Teak
Wenge
Zebrano
All types of hardwood
Our branding stamps are suitable for almost all types of wood. Not sure if the branding stamp is suitable? Feel free to contact us.
Yes, this is possible. Branding plates are easy to attach and remove using a screwdriver. It is important that the heating element has enough wattage to heat the new plate. A heating element designed for a small branding stamp is not suitable for a large plate. The dimensions of the new plate should not differ too much from the one already purchased. Please contact us for advice on the right size.
Yes, this is possible. Branding plates are easy to attach and remove using a screwdriver. It is important that the heating element has enough wattage to heat the new plate. A heating element designed for a small branding stamp is not suitable for a large plate. The dimensions of the new plate should not differ too much from the one already purchased. Please contact us for advice on the right size.
Larger sizes are available. However, we do not guarantee a good result because the object that is burned on must be completely flat for a good result. This sometimes proves to be a problem. Please give us a call or email us to discuss the options.
The logo on your branding stamp is always scaled as much as possible in both width and height, without changing the original aspect ratio. The longest side, either width or height, is the determining factor. We never alter the ratio of the image itself. A margin of 1.5 mm is maintained on both sides in width.
JH Machining branding stamps are very suitable for leather such as bracelets and bags. Because leather is very precise for a perfect branding stamp, we recommend an electric branding stamp with temperature regulator. This must warm up for about 15 minutes to reach the desired temperature of 150 degrees.
It takes about 2-5 seconds to mark a burger bun.
Our branding irons for dishes are electrically heated and are ready for use after a 25-minute heating time.
We match the shape of the brand as closely as possible to your logo. Depending on the shape of your logo, you will receive a round, square or rectangular brand.The dimensions of the shapes are:
Your logo shows best on foods with a flat surface and on peels. Examples include:
Brioche buns
Soft sandwich rolls
Citrus peels
We always check the logo. If we are afraid that it will not be beautiful, we will contact you and see how it can be made beautiful. Due to the extra deep groove in the branding mark, you can also see the details well on buns. We guarantee that the stamp will be beautiful. Otherwise, you will get your money back without any questions!
You can upload the following file types:
– .jpg
– .jpeg
– .png
– .svg
– .eps
– .psd
– .dxf
– .pdf (high quality)
– .ai (Adobe Illustrator)
– Vector files
– Word files
Please keep the following in mind when submitting your logo:
– High resolution (minimum size required)
– Clear and sharp contours
– Preferably a black-and-white logo
Of course! Please indicate in the order notes that you would like to receive a test print before we make the branding iron. We do not make test prints as standard because 99.5% of our branding irons are perfect on the first try.
Ja, natuurlijk. Geef in de opmerkingen bij het afrekenen aan welk deel van de afbeelding niet meegenomen hoeft te worden. Als we twijfels hebben, nemen we altijd contact met je op na de bestelling, voordat we de brandstempel maken. Zo weet je zeker dat het resultaat precies wordt zoals je wilt!
Yes, of course. Please indicate this in the order notes. If we have any doubts about the logo, we will always contact you first via WhatsApp, telephone, or email before we start making the branding iron. We offer a 100% satisfaction guarantee.
Yes, of course. The logo is always positioned in the center of the stamp. We always strive to place the logo as accurately as possible on the branding mark. To be sure, please indicate any specific wishes in the order notes.
Yes, absolutely. When you check out, you can provide a description of which parts of the logo you want to include and which parts you want to leave out. Our designer will take this into account and ensure that only the desired parts of the logo are visible.
No, this will not appear on the branding iron. Please indicate in the notes box at checkout which parts of the image should and should not be included in the logo.
Yes, absolutely. If we have any doubts about the image you uploaded, we will always contact you via WhatsApp, telephone, or email. If you do not want the circle to appear in the branding, please indicate this in the notes at checkout.
The logo you upload is best provided in black and white. The image you send will be converted into a black-and-white design, which we then use to produce your branding iron. If we have any doubts about the image, we will always contact you before we start production.
100% Satisfaction Guarantee
We offer a 100% satisfaction guarantee: if you are not completely satisfied with the branding iron, you will receive a full refund.
To choose the right size, keep the following in mind:
Do you want the branding mark to fill the logo as much as possible?
The logo can be slightly smaller than the brass branding plate. For example, a logo of 30 x 30 mm can also be placed on a 35 x 35 mm plate. Please indicate your preference in the order notes.
Which shape suits the logo best?
For a rectangular logo, a rectangular branding stamp works best.
For a square logo, a square stamp is ideal.
For a round logo, a round stamp is recommended.
Of course, all combinations are possible, so a round logo on a square branding stamp is also an option.
99.5% of the branding stamps we produce are perfect on the first try.
Would you still like to receive a test print? Please indicate this in the order notes. Do you have special requests for your uploaded image, such as parts you want to leave out? Please indicate this in the notes as well.
100% satisfied or your money back
We offer a 100% satisfaction guarantee. We are the only company in the Netherlands that offers a 100% satisfaction guarantee on custom-made products.
Applying a wax seal is very easy thanks to our wax gun. With these steps, anyone can do it! In addition, you will receive 2 free wax sticks from us when you order wax from us, so you can practice a bit.
How to apply a wax seal in 4 steps:
Yes, that is definitely possible! Place your order and then send your design to info@jhmachining.com . We will make sure that you receive a free digital proof first, so you know for sure that your wax stamp is made the way you want it.
Yes, to apply the wax, you need a special wax gun. A regular glue gun does not work with wax. You can easily order 1 or 2 wax guns from us.
Yes, if you order wax from us, you will receive 2 free wax sticks with your order. This will allow you to practice and always have enough wax. It is not difficult, after a few times of practicing you will be able to apply the perfect wax seal yourself!
Yes, a sealing wax stamp is also called a wax stamp. A sealing wax stamp is therefore the same as a wax stamp. Of course, the quality does differ per supplier. We deliver top quality because we make the stamps ourselves in the Netherlands. This is why we are the only supplier to offer a 30-day money-back guarantee.
Yes! We can send you a free digital proof of your wax seal stamp. This way you can be sure that the design completely meets your wishes. Do you want to adjust something? No problem.
Yes. When your package is handed over to the postal company, you will automatically receive a Track & Trace code.
Ja, dat kan. Kies in het winkelmandje de verzendoptie “Express productie”. De stempel wordt dan binnen 2 werkdagen geproduceerd en verzonden. De kosten voor express productie zijn €9,95.
Yes, that’s possible! Pickup is available by appointment only due to working hours.
Address: Rouaanstraat 21-F, Groningen, The Netherlands.
Yes, we currently deliver to all of Europe and the United Kingdom, and shipping is free.
Yes, you will receive an invoice including VAT. Are you a business? Enter your VAT number to apply the reverse-charge mechanism.
You can easily reach us on weekdays from 9:00 AM to 5:00 PM – via WhatsApp, phone or email.
English (EUR) 
Nederlands 
Deutsch 
Svenska